DEV Community

#machining

Posts

đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
Why the Same 0.01 mm Part Measures Differently in Two Buildings
chxprecisionmetal profile

Why the Same 0.01 mm Part Measures Differently in Two Buildings

#manufacturing #machining #metrology #cnc
Comments
6 min read
3+2 vs Simultaneous 5-Axis: Which One Your Aluminum Part Actually Needs
chxprecisionmetal profile

3+2 vs Simultaneous 5-Axis: Which One Your Aluminum Part Actually Needs

#cnc #manufacturing #machining #design
Comments
4 min read
Sourcing CNC Machining in Shenzhen: 8 Numbers to Ask For Before You Send a Drawing
chxprecisionmetal profile

Sourcing CNC Machining in Shenzhen: 8 Numbers to Ask For Before You Send a Drawing

#manufacturing #productivity #machining #hardware
Comments
4 min read
Humanoid Robot Parts: Which Machining Tolerances Actually Matter in an Assembly
chxprecisionmetal profile

Humanoid Robot Parts: Which Machining Tolerances Actually Matter in an Assembly

#hardware #manufacturing #machining #design
Comments
4 min read
Swiss-Type Lathe Parts: What Your Tolerance Actually Depends On
chxprecisionmetal profile

Swiss-Type Lathe Parts: What Your Tolerance Actually Depends On

#manufacturing #machining #cnc #metrology
Comments
5 min read
Optical Communication Housings: Flatness, CTE and the Tolerance Stack Nobody Checks
chxprecisionmetal profile

Optical Communication Housings: Flatness, CTE and the Tolerance Stack Nobody Checks

#manufacturing #machining #hardware #metrology
Comments
4 min read
CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation
lilu1626 profile

CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

#cnc #manufacturing #engineering #machining
Comments
14 min read
Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity
lilu1626 profile

Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity

#cnc #manufacturing #engineering #machining
Comments
14 min read
CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing
lilu1626 profile

CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing

#cnc #manufacturing #engineering #machining
Comments 1
12 min read
Feed per Tooth (fz) Explained: The CNC Parameter Behind Feed Rate and Chip Load
lilu1626 profile

Feed per Tooth (fz) Explained: The CNC Parameter Behind Feed Rate and Chip Load

#cnc #manufacturing #engineering #machining
Comments
12 min read
Cutting Speed Explained: What Is Vc and How Do You Select It for CNC Machining?
lilu1626 profile

Cutting Speed Explained: What Is Vc and How Do You Select It for CNC Machining?

#cnc #manufacturing #engineering #machining
Comments
9 min read
5-Axis DFM Checklist: 12 Design Decisions That Change Your Machining Quote
chxprecisionmetal profile

5-Axis DFM Checklist: 12 Design Decisions That Change Your Machining Quote

#manufacturing #cnc #design #machining
Comments
4 min read
CNC Spindle Speed Explained: Formula, Calculation & Practical Machining Guide
lilu1626 profile

CNC Spindle Speed Explained: Formula, Calculation & Practical Machining Guide

#cnc #machining #engineering #manufacturing
Comments
9 min read
CNC Prototype to Production: Bridging the 1-Piece to 100,000-Piece Gap
chxprecisionmetal profile

CNC Prototype to Production: Bridging the 1-Piece to 100,000-Piece Gap

#hardware #manufacturing #production #machining
Comments
3 min read
Holding 0.01 mm on 5-Axis Machined Parts: What Actually Moves the Needle
chxprecisionmetal profile

Holding 0.01 mm on 5-Axis Machined Parts: What Actually Moves the Needle

#manufacturing #production #cnc #machining
Comments
3 min read
đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.